They can confirm it is right. Drain plug can be 8mm Allen or T-50 Torx. If so, can you give me a catalog or part number? I replaced it with a new one. The R56 had two slightly different versions of the Cooper S, with an upgraded version arriving in 2010 for the 2011 model year. Apparently the filter has a valve so that when it's loosened the oil drains from it and out said drain hole.
In general, if you live in a cold climate, you should use a 10W-40 or similar oil. Verify that there's no volume of oil seeping out of the engine. Give our parts specialists a call at 1-888-280-7799. As usual, awesome instructions from Pelican. When my husband went to change the oil a spring fell out and we didn't realize there was a cage in the filter so it was thrown away. Motor oils and the additives blended into them have improved so much over the years that frequent oil changes and expensive synthetics are no longer necessary.
Some product and company names mentioned on this site may be trademarks of their respective owners. Give our parts specialists a call at 1-888-280-7799. I am new to Mini so any help would be appreciated. It clips into the bottom. When you drive it the car the light goes off. The oil filter kit shown here includes the filter and also a new O-ring for the filter housing cover. Will all the used oil drain when the front of the vehicle is on ramps? You agree that use of this site is at your sole risk.
October 10, 2013 Followup from the Pelican Staff: R56 models are 30Nm 22 ft-lb. Fill your engine with the new oil from the oil filler hole in the top of the valve cover. Verify that there's no volume of oil seeping out of the engine. Do you have them on stock? Then rotate counterclockwise as if you were removing it, then clockwise to begin threading it. Have plenty of paper towels on hand, as oil will spill from the filter if you're not careful. July 10, 2014 Followup from the Pelican Staff: Thanks, got it. Any help would be appreciated.
I tached it up to 1500 rpm and the light stayed on. May 20, 2013 Followup from the Pelican Staff: Have you tried pushing the lines out of the way? How do I reset the oil life change info? September 5, 2015 Followup from the Pelican Staff: I would think there would be wrench marks on the hex boss. When removing, be sure the filter is loose, so you can remove it first, then the housing. First thing to do is to check oil pressure when the problem is present. Figure 4 Shown here is the oil filter housing. Placing different brands, weights, and formulations in the cars, they racked up 60,000 miles on the engines, tore them down, measured, and inspected the engine components for wear.
I know that my first order was a small one but it was a really big deal for my Mini Clubman S. Use a 27mm socket to loosen and remove the oil filter housing cover See. Give our parts specialists a call at 1-888-280-7799. It helps if you 'loosen' the oil filter cannister while you drain the oil to allow the oil to drain out of the filter. Though Valvetronic trickery, power was bumped from 172 to 181 hp U.
Still, some people swear by synthetic oil. The 2nd generation R56 Mini Cooper is a modern, advanced car. Click here to see what may be causing them. What is the added benefit of the 0w? Take care to make sure the threads are lined up and it seats correctly. But nobody considers all the stuff that goes into making a modern car. An old oil filter is a good way to determine the overall condition of the engine. When you are dealing with an oil burning engine, the best repair is to either replace or rebuild the engine.
See Remove the top slowly to allow the oil to drain back into the housing, and underneath you will see the cartridge filter. To access the filter cannister, remove the washer reservoir 1 bolt but not the hoses, and move it aside. In warmer climates, you should use a 20W-50 oil. . September 1, 2018 Followup from the Pelican Staff: I'd guess you tore the sealing O-ring when installing the filter housing.